Ding-dong

Ding-dong

Product Description

Type: Acrylic lacquer, semi-matt. Ding-dong is an acrylic lacquer ready for stirring in of vinyl chips. A semi-matt surface is obtained, which is very robust against mechanical wear and cleaning. The chips effect blurs an imperfect ground, but the chips may cause a minor roughness, which can be reduced by slight sanding and extra application of Ding-dong lacquer.

Usage

Suitable interior for walls in staircases, corridors, hobby rooms etc., where
a robust surface is required.
The surface must be clean, dry and solid, and it must be uniformly painted
with e.g. Flutex 5, matt latex paint.
To 2 1/2 litres of lacquer add 100 g chips, and to 10 litres of lacquer
add 4 x 100 g chips, possibly several different colours depending on the
required effect.
The vinyl chips are preferably stirred in with a mixer for approx. 5 minutes.
The ready-mixed Ding-dong should be applied within 24 hours.
Application by brush or roller. Maximum layer 180 µ in order to prevent the
lacquer to appear yellow.
NB: Secure a warm and effective ventilation during application. Low
temperature/high humidity can result in yellowing of the film.

Technical Data

Producttype
Laquer
Gloss
20,Semi Matte
Density (kg/liter)
1,03
Weight %
21
Volume %
18
Nominal spreading rate (m2/l)
6
Min. +5°C
Dry to touch at 20°C, 60% RF (Hours)
2
Recoatable at 20c, 60% RF (Hours)
12
Fully cured at 20c, 60% RF (Days)
28
Dilution
Normally not to be diluted
Cleaning of Tools etc.
Water

Storage: Cool, frost-free and tightly closed

Version

November 2020