Flutex 5 Classic

Flutex 5 Classic

Flutex 3, 4 and 5C are full-matt, eco-labelled acrylic paints. Quick application and hiding power is the priority.

Product Description

Full-matt wall and ceiling paint with excellent hiding power. Recommended for premises with normal functional requirements, that are exposed to moderate dirt and wear and tear.
  • Wall and ceiling paint
  • Low gloss
  • Excellent hiding power

Usage

Living rooms, entrance areas, offices, kitchens and retail shops.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.

Substrate

Must be clean, dry, solid and suitable for surface treatment.

Treatment

Remove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.

Application

Brush or roller
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Producttype
Acrylic Paint
Gloss
5,Full Matte
Density (kg/liter)
1.46
Weight %
57,5
Volume %
37,7
Nominal spreading rate (m2/l)
8
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Fully cured at 20c, 60% RF (Days)
28
Emission cf. ISO 16000-9:2011
10 < µg/m²h after 28 days
Washability
Class 2
Dilution
Water, is usually not diluted
Cleaning of Tools etc.
Water

Current TDS Version

marts 2021


Replaces TDS Version

januar 2021